Grass Valley DMC 1000 v.12.4 - Manual (Page 163)

DMC 1000 Digital Media Camcorder User’s Guide (v4.0) 163
Chapter 13 - Viewfinder menu
Sens. cal Off, On Runs sensor calibration. S1
3200K cal Off, Run Runs 3200K calibration. S1
3200K reset Exec Resets 3200K calibration value to the factory
default. S1
Test patterns 3
Sawtooth 3
Sawtooth Off, On Turns sawtooth test signal on or off. 3
Fan control 3
Silent mode Rec, Off Selects mode for cooling fan:
Rec = switch temporarily to silent fan profile
during recording
Off = always use selected fan profile 3 Prod
Profile Cool, Normal, Silent Selects a profile for the cooling fan:
Cool = maximum cooling
Normal = normal cooling
Silent = minimal cooling 3 Prod
Time/date 2
Year 2000..2099 Sets the value for year. 2
Month 1..12 Sets the value for month. 2
Day 1..31 Sets the value for day. 2
Store Date Exec Activates the new date settings. 2
Hour 00..23 Sets the value for hour. 2
Minutes 00..59 Sets the value for minutes. 2
Seconds 00..59 Sets the value for seconds. 2
Store Time Exec Activates the new time settings. 2
Buttons 0
Contrast button BlkStrKnee, Knee, BlkStr
Disabled Assigns a function to the contrast button:
BlkstrKnee = black stretch + knee
Knee = knee only
Black str = black stretch only
Disabled = nu function 0 Oper
User buttons 0
Button 1 Disable, Ext Iris, Mark
out, Mark in, Record,
Forward, Rewind,Pause
play, Stop play, Start play Assigns a function to user button 1 on the
side panel of the camcorder. 0 Oper
Button 2 Disable, Ext Iris, Mark
out, Mark in, Record,
Forward, Rewind,Pause
play, Stop play, Start play Assigns a function to user button 2 on the
side panel of the camcorder. 0 Oper
Lens 0
RET button Ext signal, playback Assigns a function to the RET button on the
lens. 0 Oper
Handgrip 0
Zoom control Enabled, Disabled Enables or disables the zoom control on top of
the camcorder’s carrying handle. 0 Oper
Viewfinder menu item Values Description Level File