Table 2-7, Eiver, Describes t – Xilinx 1000BASE-X User Manual

Page 37

Advertising
background image

Ethernet 1000BASE-X PCS/PMA or SGMII v9.1

www.xilinx.com

37

UG155 March 24, 2008

Core Interfaces

R

Table 2-7:

Optional RocketIO Transceiver Interface Pinout

Signal

Direction

Description

mgt_rx_reset

1

1. When the core is used with a RocketIO transceiver, userclk2 is used as the 125 MHz reference clock

for the entire core.

Output

Reset signal issued by the core to the RocketIO
transceiver receiver path. Connect to RXRESET signal
of RocketIO transceiver.

mgt_tx_reset

1

Output

Reset signal issued by the core to the RocketIO
transceiver transmitter path. Connect to TXRESET
signal of RocketIO transceiver.

userclk

Input

Also connected to TXUSRCLK and RXUSRCLK of the
RocketIO transceiver. Clock domain is not applicable.

userclk2

Input

Also connected to TXUSRCLK2 and RXUSRCLK2 of
the RocketIO transceiver. Clock domain is not
applicable.

dcm_locked

Input

A DCM may be used to derive userclk and userclk2.
This is implemented in the HDL design example
delivered with the core. The core will use this input to
hold the RocketIO transceiver in reset until the DCM
obtains lock. Clock domain is not applicable.

rxbufstatus[1:0]

1

Input

Connect to RocketIO signal of the same name.

rxchariscomma

1

Input

Connects to RocketIO signal of the same name.

rxcharisk

1

Input

Connects to RocketIO signal of the same name.

rxclkcorcnt[2:0]

1

Input

Connect to RocketIO signal of the same name.

rxdata[7:0]

1

Input

Connect to RocketIO signal of the same name.

rxdisperr

1

Input

Connects to RocketIO signal of the same name.

rxnotintable

1

Input

Connects to RocketIO signal of the same name.

rxrundisp

1

Input

Connects to RocketIO signal of the same name.

txbuferr

1

Input

Connects to RocketIO signal of the same name.

powerdown

1

Output

Connects to RocketIO signal of the same name.

txchardispmode

1

Output

Connects to RocketIO signal of the same name.

txchardispval

1

Output

Connects to RocketIO signal of the same name.

txcharisk

1

Output

Connects to RocketIO signal of the same name.

txdata[7:0]

1

Output

Connect to RocketIO signal of the same name.

enablealign

1

Output

Allows the transceivers to serially realign to a comma
character. Connects to ENMCOMMAALIGN and
ENPCOMMAALIGN of the RocketIO.

Advertising