IAI America RCS3PCR-SS8C - Manual (Page 106)


11. Maintenance and Inspection
96
11.8.2 RCS3(P)CR-SA8C
[Items Required for Replacement]
� Replacement stainless sheet
� Allen wrench set
� Phillips screwdriver
� Measure
[Note on Stainless Sheet Tension]
Deterioration and wear of the stainless sheet is affected by its tension.
If the stainless sheet is too tight, excessive clearances will be created between the sheet and slider covers and
the sheet may undergo a fatigue failure.
If the stainless sheet is too loose, the sheet will contact the back of the slider covers and generate shaving.
Therefore, use a dedicated adjustment tool to properly adjust the tension of the stainless sheet so that the
clearances between the stainless sheet and slider covers conform to the specified dimension.
[Name of Each Part]
Slider cover Stainless sheet
Slider-cover affixing
screw (flat countersunk-
head screw)
Stainless-sheet
retainer cover
Stainless-sheet retainer
cover mounting screw
Stainless-sheet retainer
cover mounting screw