Options, 1 brake, 2 foot bracket – IAI America RCS3PCR-SS8C User Manual
Page 81: Options 71
9. Options
71
9. Options
9.1 Brake
The brake is a retention mechanism that prevents the slider, when installed vertically, from dropping and thereby
damaging the attached load when the power or servo is turned off.
The brake option must be selected for every axis that will be used vertically.
The model number for this option is “B,” “BE,” “BL” or “BR.”
9.2 Foot Bracket
This bracket is used to secure the actuator from above using bolts. The applicable code for this option is “FT.”
If large moment loads will generate, install foot brackets at all mounting holes in the actuator to install the
actuator.
If there are not enough foot brackets, the actuator may deflect and its life may become shorter.
Actuator
model number
Actuator
model number
Actuator
model number
* If the actuator option code “FT” is
specified, the actuator will come with two
foot brackets.
* If the actuator option code “FT” is
specified, the actuator will come with two
foot brackets.
* If the actuator option code “FT” is
specified, the actuator will come with two
foot brackets.
Enlarged view of A
Enlarged view of A
Enlarged view of A
A
A
A
R
e
fe
re
n
ce
s
u
rf
ac
e
o
f t
h
e
a
ct
u
a
to
r
R
ef
er
en
ce
s
ur
fa
ce
o
f
th
e
ac
tu
at
or
R
ef
er
en
ce
s
ur
fa
ce
o
f
th
e
ac
tu
at
or
n – oblong hole
(for installing the
actuator)
n – oblong hole
(for installing the
actuator)
n – oblong hole
(for installing the
actuator)