Change history – IAI America RCS3PCR-SS8C User Manual
Page 254
246
Change History
Change History
May 2010
Fifth edition
Added information on RCS3 and RCS3CR actuators.
June 2010
Sixth edition
P. 25
Changed the maximum speed of RCS3 and RCS3CR at lead
30.
1790 mm/s
1800 mm/s
P. 56
Changed the rates of suction.
SS8, lead 10 mm: 90 Nl/min
80 Nl/min
SS8, lead 30 mm (speed not exceeding 1500 mm/s):
150 Nl/min
160 Nl/min
SS8, lead 30 mm (speed exceeding 1500 mm/s): 190 Nl/min
(added)
November 2010
Seventh edition
Important Note
Eighth edition
Added “Adding Grease on the Clean Room Specification.”
P. 9
Added 6, “Do Not Loosen the Mounting Screws of Micro-Switches
or Bend the Switch Dogs” under “Handling Precautions.”
P. 19
Added 2, “Motor/Encoder Cables.”
Added note *1.
P. 23
Added options “VL” and “VN.”
P. 24 to 32
Added SA5 and SA6 specifications of lead 20.
P. 36
Added (7), “Actuator precision.”
P. 37
Added 3, “Life.”
P. 54
Added [Connecting to SCON/SSEL Controller] and [Connecting
to X-SEL Controller].
P. 57 to 64
Added 7, “Setting the Home.”
P. 66 to 68
Added 9, “Options.”
P. 73
Added 11.4, “Adjusting the Stainless Sheet.”
P. 189
Added 11.10.10, “Replacing the Motor of the Motor Straight Type
(Built-in Type).”
P. 190
Added 12, “Appendix – External Dimensions.”
P. 9
Change made to duty calculation
P. 25, 26
TA added to encoder types, Caution added
April 2011
June 2011
Tenth edition
July 2011
Eleventh edition
P. 44
P. 44
P. 232 to 233
Contents of caution for vertically oriented mount changed.
Change in ceiling installation availability
Contents
changed
in 13. Warranty
î 1RWLQVWDOODEOHĺޓޓ: Daily inspection is required)
May 2011
Ninth edition
Revision Date
Description of Revision