IAI America RCS3PCR-SS8C - Manual (Page 19)


11
8. Transporting and Handling
8.1 Handling the Actuator
8.1.1 Handling the Packed Unit
Unless otherwise specified, each actuator (axis) is shipped individually.
Please take care that the shipping box is not dropped or subjected to strong impact during transport.
The operator should not carry heavy shipping boxes by themselves.
If the shipping box is left standing, it should be in a horizontal position.
Do not climb on top of the shipping box.
Do not place heavy objects on top of the shipping box.
8.1.2 Handling the Actuator After It is Unpacked
Lift the actuator up by the base to remove it from the packing.
When carrying the actuator, take care not to bump it. Take particular care with the front cover and motor cover.
Do not exert excessive force on any part of the actuator.
Be careful not to cause the cables to receive a tensile force.
Note on handling the stainless sheet
The stainless sheet is designed very thin (thickness: Approx. 0.1 mm) in order to ensure flexibility. Therefore,
the stainless sheet is easily dented or scratched. Once dented or scratched, the stainless sheet may break
during use.
Warning: Do not press the sheet directly
with hands.
Supplement) Please refer to "Names of Parts" for the names of the actuator parts.