Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 116)

LabMaster 10 Zi Oscilloscopes
108
922561-00 Rev A
Parameter Setup
1. Touch the parameter tab (Px) of an unused location or one that you
want to change.
2. Under Type, select a measurement type:
Measure On Waveforms applies measurements directly on
the waveform as indicated on the Source1 control.
Math On Parameters performs math (addition,
subtraction, multiplication, division) on parameters
indicated on the Source1 and Source2 controls.
Advanced Web Edit uses Teledyne LeCroy's Processing
Web for measurement setup. This feature, available with
the XWEB option, allows you to chain practically unlimited
math functions together for operation on your waveform
measurements.
3. Touch inside the Source1 field and select a channel, math trace,
memory trace, or other waveform to be measured.
4. If you selected Measure On Waveforms, touch inside the Measure
field and select a parameter from the pop-up menu.