Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 145)

Getting Started Manual
922561-00 Rev A
137
(other than being embedded in the hardcopy image). This means that
when flashback is used, the measurements are recomputed using the
recalled waveform data. Normally, doesn't pose a problem; however,
if cumulative measurements were on when the entry was stored and
the cumulative measurements accumulated data from multiple
acquired waveforms, they lose their history and show instead only
the results from the stored waveforms.
Find Notebook Entries
You can use the Up and Down arrows to move through your My Notebook
Entries list one row at a time.
To filter a large amount of entries:
1. Touch the Filter button. The Filter Entries pop-up is shown.
2. To filter by date, check Show only records created on this date, and
enter a Day, Month, and Year.
OR
To filter by keyword, check Show only records containing this
keyword, and enter the Keyword.
3. Touch the Find Now button to apply your filter to the My Notebook
Entries list.