Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 154)

LabMaster 10 Zi Oscilloscopes
146
922561-00 Rev A
Utilities
Utilities Dialog
Selecting Utilities → Utilities Setup... displays the main Utilities dialog. The
following controls are available from this dialog:

HardCopy Setup, Date/Time Setup, and System Status buttons open
their corresponding dialogs.
NOTE : The currently selected printer is displayed to the right of the
HardCopy Setup button for convenience.

Show Windows Desktop button instantly minimizes the oscilloscope
application. Maximize the application by touching the shortcut icon
located at the lower-right of the screen.

Touch-Screen Calibration button launches a sequence of calibration
screens. These screens instruct you to touch a series of displayed
crosses in order to improve precision and accuracy when using your
touch screen. The calibration procedure times out if no cross is
touched for 10 seconds.

Service button launches a section of the application reserved for
qualified Teledyne LeCroy personnel. An access code is required to
enter this section.