Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 157)

Getting Started Manual
922561-00 Rev A
149
Configuring the Remote Control Assistant Event Log
1. Under Remote Control Assistant, touch inside the Log Mode data
entry control. Select Off, Errors Only, or Full Dialog from the pop-up
menu.
2. Export the contents of the event log to an ASCII text file by touching
the Show Remote Control Log button. The Event Logs pop-up is
shown.
3. Touch inside the DestFilename data entry control and provide a file
name using your preferred input control method. Additional
information on using the touch screen controls can be found in the
Dialog Area.
4. Then, touch the Export to Text File button.