Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 171)

Getting Started Manual
922561-00 Rev A
163
Color
Use this dialog to customize the colors used for Channels, Math, and
Memory traces when shown on your instrument and when used in print
output.
NOTE : These color settings match a waveform on the grid display (both on-screen
and printed) and show consistently on corresponding dialogs , tables , and trace
descriptor labels .
Channels - Make Screen and Print color selections for C1 through C4 by
touching one of the color swatches. When the Color pop-up is displayed,
use it to specify your desired color.
Math Traces - Make Screen and Print color selection for F1 through F8 by
touching one of the color swatches. When the Color pop-up is displayed,
use it to specify your desired color.
Memory Traces - Make Screen and Print color selection for M1 through M4
by touching one of the color swatches. When the Color pop-up is displayed,
use it to specify your desired color.
Factory default colors - click this button to instantly recall the original color
settings for your instrument.
NOTE : Print colors are used only when the Colors control is set to Print on the
Hardcopy dialog in Utilities → Utilities Setup... . For convenience, the Preview
print colors button is provided on this portion of the dialog. When the button is
touched, a preview is generated on the grid display area. A subsequent touch of the
button closes the preview.