Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 18)

LabMaster 10 Zi Oscilloscopes
10
922561-00 Rev A
Back of MCM-Zi Master Control Module
Number and Description
1. ChannelSync Outputs -
SMA 10 GHz Clock and
PCIe 1 Lane Control
Connections (for
corresponding
Acquisition Modules)
2. 10 MHz Reference Clock
Output
3. 10 MHz Reference
Clock Input (Grounded
EMI Shield required
when not in use)
4. Removable Storage
Drive
5. AC Power Inlet
6. The I/O Panel
7. DVI-D Video Output
8. PCIe 4 Lane Data
Inputs (from
corresponding
Acquisition
Modules)
PLEASE NOTE THE FOLLOWING:

Cap-off unused ChannelSync SMA sockets (item 1) using the provided
chain-linked 50 Ω terminations (not shown).

10 MHz Reference Clock Inputs are specifically intended for
synchronization with other instruments; not between Master Control
Module and Acquisition Modules.

DVI-D Video Output is for use with an additional external monitor for
Extended Desktop mode.