Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 12)

LabMaster 10 Zi Oscilloscopes
4
922561-00 Rev A
beneath the oscilloscope clear of paper and other items.
The instrument also has internal fan control circuitry that regulates the fan
speed based on the ambient temperature. This is performed automatically
after start-up.
Cleaning
Clean only the exterior of the oscilloscope using a damp, soft cloth. Do not
use harsh chemicals or abrasive elements. Under no circumstances
submerge the instrument or allow moisture to penetrate it. Avoid electric
shock by unplugging the power cord from the AC outlet before cleaning.
CAUTION. Do not attempt to clean internal parts. Refer to qualified
service personnel.
Lifting and Moving
Components housed in the OC910 oscilloscope cart may be wheeled from
place to place as a unit. If components must be removed from the cart or
other mounting, disconnect and move components separately. Use care
when lifting and moving heavy components.
Calibration
The oscilloscope is calibrated at the factory prior to being shipped. The
recommended calibration interval is one year. Calibration should be
performed by qualified personnel only.
The oscilloscope software includes both automatic and user-initiated
deskew calibration functions.
Schedule an annual factory calibration as part of your regular maintenance.
Extended warranty, calibration, and upgrade plans are available for
purchase. Contact your Teledyne LeCroy sales representative or
[email protected] to purchase a service plan.