Labmaster setup, Pcie 1 lane cable sync connection(s) – Teledyne LeCroy LabMaster 10Zi Operators Manual User Manual
Page 24
Advertising
![background image](/manuals/353439/24/background.png)
LabMaster 10 Zi Oscilloscopes
16
922561-00 Rev A
LabMaster Setup
PCIe 1 Lane Cable SYNC Connection(s)
Connect each PCIe 1 Lane Control Input on the back of your 10-xxZi
Acquisition Modules to a PCIe 1 Lane Output on the MCM-Zi Master Control
Module using the PCIe 1 Lane cable(s) provided.
PCIe 1 Lane Cable
On the back of the Master Control Module, plug one end of the PCIe 1 Lane
cable into the PCIe 1 Lane Channel Sync Output (labeled SYNC).
Advertising