Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 57)

Getting Started Manual
922561-00 Rev A
49
From this pop-up you can edit existing annotations, change the label
placement on the waveform, add labels, remove labels, and toggle the
visibility.

If you are modifying an existing label, under Labels touch the label
you want to change.
NOTE : If the Channel dialog for the trace you want to annotate is currently
displayed, touch the Label button at the bottom to display the Trace
Annotation setup dialog. You may place a label anywhere you want on the
waveform. Labels are numbered sequentially according to the order in
which they are added, and not according to their placement on the
waveform.

If you want to change the label's text, touch inside the Label Text
field. A pop-up keyboard appears for you to enter your text. Touch
O.K. on the keyboard when you are done. The edited text
automatically appears in the label on the waveform.

Precisely place the label by touching inside the Horizontal Pos. field
and provide a horizontal value, using the pop-up numeric keypad.

Add another label by touching the Add label button. Delete a label by
selecting the label from the list, and then touching the Remove label
button.

Make labels visible by touching the View labels checkbox.