Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 56)

LabMaster 10 Zi Oscilloscopes
48
922561-00 Rev A
S
HORTCUT
B
UTTONS
You can access the same functions as available from the Signal Display Grid
Pop-Up menu by touching a trace-descriptor label to open the setup dialog.
From the setup dialog, shortcut buttons enable you to:

Open the Math dialog for the trace.

Open the Measure dialog for the trace.

Annotate the selected trace.
A
NNOTATING
T
RACES
The instrument gives you the ability to add an identifying label, bearing your
own text, to a waveform display:
For each waveform, you can create multiple labels and turn them all on or
all off. Also, you can position them on the waveform by dragging or by
specifying an exact horizontal position.
On the display grid, touch the waveform you want to annotate, then touch
Set label... on the pop-up menu. A dialog box opens in which to create the
label. The first time creating a waveform label, Label1 is provided as default
text when the Add label button is touched.