Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 117)

Getting Started Manual
922561-00 Rev A
109
OR
If you selected Math On Parameters, touch inside the Math
Operator data entry field and select a math function from the pop-up
menu.
5. In the mini-dialog to the right of the main setup dialog, touch the
Gate tab to narrow the span of measurement.
6. Touch the Accept tab to define parameter values to be used in the
measurement.
Measure Modes
The selections for Measure Mode allow you to quickly apply parameters for
standard vertical and standard horizontal setups, and custom setups.
Standard Vertical Parameters
mean sdev max. min. ampl pkpk top base
Standard Horizontal Parameters
freq period width rise fall delay duty num
points