Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 162)

LabMaster 10 Zi Oscilloscopes
154
922561-00 Rev A
Print to E-mail
The E-mail selection on the Hardcopy tab gives you the option to e-mail
your screen images, using either the MAPI or SMTP protocols. Before you
can send e-mail from the Utilities dialog, you must first set up the e-mail
server and recipient address in Preference Setup....
F RONT P ANEL M ETHOD
NOTE : To use this method, first configure E-mail settings on the Hardcopy dialog
(using the procedure below). The instrument automatically uses the additional
clipboard settings to save the screen image to the clipboard.
Press the Print front panel button. Then, touch the Send Screen To E-mail
button from the Print flyout menu.
H
ARDCOPY
D
IALOG
M
ETHOD
1. Touch Utilities → Utilities Setup... and click the Hardcopy tab.
2. On the Hardcopy dialog, touch E-mail.
3. Touch inside the File Format data entry control and select a graphic
file format from the pop-up menu.
4. Touch the Colors control and choose Standard to print the screen as
it appears, Print to print the waveforms on a white background, or
Black & White to print the waveforms in black & white.
5. Touch the Prompt for message to send with mail checkbox if you
want to include remarks with the image.
6. Touch the Hardcopy Area control and choose which part of the
screen you want to print:

Grid Area Only if you do not need to print the dialog area and
you only want to show the waveforms and grids.

DSO window if you want to print the dialogs with the
waveforms and grids.

Full Screen if you want to print the entire screen.
7. Touch the Print Now button.