Connecting the co, Sampling lines – ZOLL Propaq M Rev B User Manual
Page 110
Advertising
C
HAPTER
10 M
ONITORING
CO2
10-4
www.zoll.com
9650-0803-01 Rev. B
Connecting the CO
2
Sampling Lines
To connect the FilterLine or Smart CapnoLine:
1. Slide open the Propaq M unit’s CO
2
inlet port cover.
2.
Put the fitting at the end of the tubing over the CO
2
inlet port connector.
3.
Turn the fitting clockwise to tighten.
Figure 10-1 Connecting the Sampling Line Connector to the CO
2
Inlet Port
Advertising