ZOLL Propaq M Rev B - Manual (Page 143)

12-Lead Display Options
9650-0803-01 Rev. B Propaq M Operator’s Guide 13-9
12-Lead Display Options
The Propaq M unit provides additional 12-Lead display options that you can specify through
the Supervisor parameter control panels (access to Supervisor is passcode-controlled).
Press the Setup quick access key ( ), then select Supervisor . Using the navigation keys,
highlight and select the four digits in the Supervisor passcode:
Select the Supervisor> ECG> 12-Lead options to display the 12-Lead parameter control panel:
Specifying the 12-Lead Frequency Response
This option allows you to specify the frequency response of the 12-Lead waveform display.
You can specify the following trace display ranges:
12-Ld Frequency Response Diagnostic
Display Type Frequency Response
Diagnostic 0.05 to 150 Hz
Filtered Diagnostic 0.25 to 40 Hz