ZOLL Propaq M Rev B - Manual (Page 37)

Common Tasks
9650-0803-01 Rev. B Propaq M Operator’s Guide 2–11
Navigation Keys
Use the navigation keys (up/clockwise arrow, down/counterclockwise arrow, and action button)
to navigate through windows and make selections.
Using Up/Clockwise and Down/Counterclockwise Arrows
Use the up/clockwise down/counterclockwise arrows to do the following:
• Move clockwise and counterclockwise through the main display windows.
• Move up and down in a window.
• Change parameter settings.
Using the Select Button
Use the Select button to do the following:
• Display the settings window while a parameter is highlighted in the main window.
• Select options from a window.
Display Brightness
The monitor can display in three different brightness modes:
• high contrast with white background (for optimal display in bright sunlight)
• color with black background (numerics and waveforms are easy to read)
• night vision goggle (NVG) friendly (display and alarm LEDs prevent interference with
goggles)
Common Tasks
The section contains procedures for the following tasks:
• “Changing the Display Brightness” on page 2-11.
• “Replacing a Battery Pack on the Propaq M” on page 2-12.
• “Using Treatment Buttons” on page 2-13.
Changing the Display Brightness
The following procedure shows how to select the different brightness options.
1. Press the power switch to turn the unit on.
2. Press the Brightness quick access key ( ) repeatedly to toggle through the brightness
options until you find your selection.
Note: Selecting a higher brightness setting (such as 70%) will deplete the battery pack at a
faster rate than when choosing a lower brightness setting (such as 30%). To select the
brightness setting, go to the Setup>Display/Volume>Display Brightness menu to
adjust the display percentage.