Connecting the temperature probe, Displaying temperature – ZOLL Propaq M Rev B User Manual
Page 130
C
HAPTER
12 M
ONITORING
T
EMPERATURE
12-2
www.zoll.com
9650-0803-01 Rev. B
Warning!
•
The application and use of metal-jacketed temperature probes that come in contact
with conductive objects or clinical personnel during electrocautery may cause burns
at the point of contact between the patient and the temperature probe.
•
Use only ZOLL-approved temperature probes. The use of non-approved probes may
result in accurate measurements.
Connecting the Temperature Probe
To connect the temperature probe, insert the probe’s 1/4” plug into one of the two connection
jacks on the side of the Propaq M unit.
Figure 12-1 Connecting the Temperature Probe to the Propaq M Unit
Displaying Temperature
When you connect the probe, the unit displays the temperature after a brief pause. The
Propaq M unit displays temperature as a numeric value in the Temperature window. You can
specify that the unit display the temperature in
C or
F.