ZOLL Propaq M Rev B - Manual (Page 119)

9650-0803-01 Rev. B 11-1
Chapter 11
Monitoring Invasive Pressures (IBP)
The Propaq M IBP inputs are Type CF defibrillator proof.
This chapter describes how to use the Propaq M unit to monitor invasive pressures (IBP).
The Propaq M unit has three invasive pressure channels: P1, P2, and P3. You can use these
channels to measure arterial, venous, or intracranial pressures using invasive transducers with
5uV/V/mmHg sensitivity. Each channel requires its own connector, cabling, and pressure
transducer.
Invasive Pressure Transducers
The Propaq M unit is compatible with many types of invasive pressure transducers, including
non disposable, disposable dome, and fully disposable transducers. See Appendix B,
Accessories, for a list of compatible transducers. Do not use light-sensitive disposable
transducers.
Use the invasive pressure transducers according to your organization’s established clinical
protocol and follow the manufacturer’s recommendations. Always refer the manufacturer’s
Directions for Use before using a transducer.