ZOLL Propaq M Rev B - Manual (Page 31)

Monitor Controls and Indicators
9650-0803-01 Rev. B Propaq M Operator’s Guide 2–5
Color coding
To differentiate information for various parameters, the unit displays each type of information
in a specific user-configurable color.
Battery Status and Auxiliary Power Indicators
The battery status indicator displays various battery icons to indicate the approximate
remaining unit run time based on the charged state of the battery. Additionally, these icons
provide indications of the status of the battery connection and communication with the unit.
The auxiliary power indicator indicates that the unit is being powered by the auxiliary power
adapter.
Upon powering up the Propaq M unit, the battery capacity will be displayed within
approximately 15 seconds under normal conditions.
Icon Status Indication/Action
Auxiliary power adapter is
connected The unit is being powered by the
auxiliary power adapter.
No battery detected Either there is no battery in the unit
while it is being powered by the
auxiliary power adapter, or the
device cannot detect that the bat-
tery is connected.
Low battery capacity Replace the battery soon.
Communication failure The unit is unable to establish
communication with the battery
and the battery capacity is
unknown. Check the battery con-
tacts.
Battery fault A battery fault has been detected.
Replace the battery.
Battery Level 1 The battery has less than one hour
of remaining battery capacity.
Battery Level 2 The battery has greater than one
hour of remaining battery capacity.
Battery Level 3 The battery has greater than two
hours of remaining battery capac-
ity.
Battery Level 4 The battery has greater than three
hours of remaining battery capac-
ity.
Battery Level 5 The battery is fully charged.