ZOLL Propaq M Rev B - Manual (Page 85)

The NIBP Numeric Display
9650-0803-01 Rev. B Propaq M Operator’s Guide 8-3
The NIBP Numeric Display
When NIBP monitoring has been set up and the Propaq M unit has begun taking NIBP
measurements, the systolic, diastolic, and mean blood pressure measurements appear on the
NIBP numeric display as follows:
The following sections describe how to set up NIBP monitoring.
NIBP Setup and Use
To take safe and accurate NIBP measurements using the Propaq M unit, you must perform the
following steps, each of which corresponds to a section in this chapter. Read each section
carefully before you perform NIBP measurements.
1. Select the correct size cuff.
2. Apply the cuff to the patient.
3. Connect the inflation hose to the Propaq M unit and to the cuff.
4. Configure NIBP alarms and settings (if the current NIBP alarms and settings are not
appropriate).
5. Press the NIBP button on the Propaq M unit’s front panel and take the blood pressure
measurement.
138
89
(112)
NIBP mmHg