ZOLL Propaq M Rev B User Manual
Page 77
Configuring Respiration (RR/BR) Alarms and Settings
9650-0803-01 Rev. B
Propaq M Operator’s Guide
7-3
Configuring Respiration (RR/BR) Alarms and Settings
The Propaq M unit allows you to enable and disable the Respiration (
RR/BR
) Rate alarm, to set
alarm limits, and to specify the ECG monitoring source for the Respiration rate.
Enabling/Disabling RR/BR Alarms and Setting Alarm Limits
When enabled, the Propaq M unit sounds alarms whenever the patient’s respiration rate is
above or below the specified respiration rate alarm limits.
To enable (or disable) Resp alarms and set Upper and Lower alarm limits, you can either do so
through the Alarms quick access key (
), or the Resp Parameter Control Panel.
To configure
RR/BR
alarms through the Alarms quick access key:
1. Press .
2.
Press .
3.
Press the Limits quick access key (
). Use the navigation keys to highlight and select the
RR/BR Alarm
menu selection.
4.
On the
RR/BR
Alarm Settings menu, use the navigation keys to select the fields that you want
to change:
•
Upper Limit Enable
•
Lower Limit Enable
•
Upper Limit
•
Lower Limit
When you are finished changing values on the alarm menu, navigate to the Backarrow key to
confirm your choices and exit the menu.
Limits