Clearing the log – ZOLL Propaq M Rev B User Manual
Page 148
Advertising
C
HAPTER
14 P
ATIENT
D
ATA
14–4
www.zoll.com
9650-0803-01 Rev. B
Clearing the Log
You should clear the patient data log after transferring data to the USB device or when the log is
full.
Note:
Clearing the log during patient treatment results in the loss of all patient data and
events recorded prior to clearing the log. Clearing the log creates a New Patient record
and all patient-specific parameters (alarm limits, etc.) are set to their default values.
To clear the log:
1. Press .
2.
Press .
3.
Press the Clear Log quick access key (
).
3. Use the navigation keys to select Yes.
Warning!
To avoid a possible shock hazard, do NOT make any electrical connections to the USB
port except to connect a USB flash drive while in the vicinity of the patient.
LOG
Advertising