ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 13
Advertising
Uploading Data from a Compact Flash Card
9650-0902-01 Rev. K
7
System Configuration mode, press the Exit Config softkey. See “Leaving Configuration
Mode” on page 11 for more information.
If the unit encounters an error reading the memory card, one of the following error messages is
displayed:
Error Message
Description
CARD READ FAILED
No response is detected from the card reader.
BAD CARD
The unit cannot read the card.
NO CARD INSERTED
The card is not installed in the data card slot.
Advertising