Aed mode, Display ecg in aed mode, Display hr in aed mode – ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 57: Manual confirm enable
AED Mode
9650-0902-01 Rev. K
51
AED Mode
The AED parameters are attributes that affect functions related to performing defibrillation
with an R Series unit in AED mode and include:
•
Display ECG in AED Mode
•
Display HR in AED Mode
•
Manual Confirm Enable
•
Extra CPR Interval Before 1st Analysis
•
Duration of Extra CPR Interval
•
Display Remaining CPR Timer
Display ECG in AED Mode
This parameter allows you to set the unit to either display or not display the patient’s ECG trace
on the monitor while in AED mode.
Values are as follows:
Display HR in AED Mode
This parameter allows you to set the unit to display the patient heart rate on the monitor while
in AED mode.
Values are as follows:
Manual Confirm Enable
This parameter allows you to set a confirmation key to enter Manual mode.
Values are as follows:
Possible Values:
Yes, No
Default:
Yes
Possible Values:
Yes, No
Default:
No
Possible Values:
Yes, No
Default:
Yes