Leaving configuration mode, Procedure – ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 17
Leaving Configuration Mode
9650-0902-01 Rev. K
11
Leaving Configuration Mode
Procedure
Follow the step below to leave System Configuration mode:
4.
When you are finished, you can either press the
Category List softkey to return to the Category
screen, or press the Prev Item or Next Item
softkey to move to another option whose
settings you want to modify.
Step
Action
Step
Action
1.
Press the Exit Config softkey from the Main System
Configuration screen to display the Exit
Configuration screen.
Use the Prev Item and Next Item softkeys to toggle
the highlighted area between the following options:
•
SAVE CHANGES AND EXIT - saves all
configuration changes you made and prompts
you to Save to Card. If you specify Yes, the
configuration information is saved to the installed
Compact Flash card. Lastly, the message
POWER OFF TO EXIT CONFIG is displayed.
Power off the unit.
•
DISCARD CHANGES AND EXIT-disregards the
changes you made and displays the message
POWER OFF TO EXIT CONFIG. Power off the
unit.
•
RETURN TO MAIN MENU- returns you to the
Main System Configuration screen, where you
can make more changes by selecting the
Change Config softkey. You do not have to re-
enter the passcode
.
Note:
No changes are made if you turn the unit
off without saving the configuration.
Enter
Next
Item
Prev
Item
System Configuration
Save Changes and Exit
Discard Changes and Exit
Return to Main Menu