ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION - Manual (Page 68)

Chapter 2 Configuration Settings
62 9650-0902-01 Rev. K
Procedure
Follow these steps to set up a server port name.
Server Name (Defib History)
This setting allows you to specify the server name string to use (up to 255 characters) if the
following conditions are met:
• Use DNS is set to Yes
• Defib History Transfer Mode is not set to None
Allowable characters:
A-Z, a-z, 0-9
-. (hyphen, period)
Step Action
1. From the Select Configuration Categories screen,
select Wi-Fi, then press the Enter softkey.
The Wi-Fi Settings screen appears.
2. Press the Next Item softkey until Set Server Port
(Full Disclosure) appears and press the Change
Value softkey.
The Set Full Disc. Server Port screen appears.
3. Use the softkey as follows:
•

— moves the highlight up, down,
left, and right through the character selection
table.
• Enter Char — enters the highlighted
character for each digit of the port.
• Return — returns you to the Wi-Fi
Configuration screen. Press the Return
softkey when you are finished entering the
server port name.
Next
Item
Prev
Item
System Configuration
Wi-Fi Configuration
Defib History
Transfer Mode
DHCP/
Static IP
Both
Static IP
Main
Menu
Exit
Config
Category
List
Change
Value
Full Disclosure
Transfer Mode
Server
Page 1 of 7
System Configuration
Set Full Disc. Server Port
1 1 0 0 0
Return
Enter
Char
1
Cancel 4
7
2
5
8 3
6
9
0
<
<
.