Audio settings, Qrs volume on power-up, Low battery tone – ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 27: Enable corrective voice prompts
Audio Settings
9650-0902-01 Rev. K
21
Audio Settings
The Tone settings control audio functions on the R Series unit, and include:
•
QRS Volume on Power-Up
•
Low Battery Tone
•
Enable Corrective Voice Prompts
QRS Volume on Power-Up
This setting allows you to select the default QRS beeper volume when you power on the unit. If
you set this setting to Off, the unit does not beep during ECG monitoring.
Values are as follows:
Low Battery Tone
This setting allows you to select the interval between Low Battery warning beeps. The Low
Battery warning message is displayed once per minute, regardless of this setting.
Values are as follows:
Enable Corrective Voice Prompts
This setting allows you to specify whether voice prompts accompany the following corrective
messages:
•
Press Charge
•
Select Defib Mode
•
Remove Sync
•
Release Shock
•
Use Paddle Discharge
Values are as follows:
Possible Values:
On, Off
Default:
On
Possible Values:
1 Min, 5 Min
Default:
5 Min
Possible Values:
Yes, No
Default:
Yes