ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION - Manual (Page 19)

9650-0902-01 Rev. K 13
Chapter 2
Configuration Settings
This chapter describes all of the configuration settings on the R Series and includes the
following sections.
• “General Settings” on page 14
• “ECG Settings” on page 19
•
• “Basic Defibrillation Settings” on page 22
• “Advisory Defib” on page 24
• “CPR Settings” on page 31
• “Pace Settings” on page 33
• “Alarms Settings” on page 34
• “Display Settings” on page 40
• “NIBP Settings (Optional)” on page 43
• “EtCO2 Settings (Optional)” on page 46
• “Printer & Report Settings” on page 48
• “Readiness Test Settings” on page 49
• “AED Mode” on page 51
• “Wi-Fi Settings (Optional)” on page 53
Note: The instructions in this chapter assume that you powered on the unit in System
Configuration mode as described in “Entering System Configuration Mode” on
page 2, and are familiar with how to access the settings, see “Accessing and Changing
Configuration Settings” on page 10.