ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION - Manual (Page 9)

Printing Configuration Settings and Activity Logs
9650-0902-01 Rev. K 3
Printing Configuration Settings and Activity Logs
To print the current configuration or activity log of your unit while the unit is in the System
Configuration mode, press the Print softkey from the Main System Configuration menu. For
instructions on putting the unit in System Configuration mode, refer to the previous section,
“Entering System Configuration Mode.”
Printing Configuration Settings
In System Configuration mode, press the Print softkey, then the Print Config softkey to print a
stripchart of all the unit’s configuration settings. See a copy of a sample Configuration Report
below.
Note: In normal operation, you can print the configuration by pressing the following
softkeys: Options, More, then Print Config.