Server port (full disclosure), Procedure, Follow these steps to set up a server ip address – ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 67: Use the softkey as follows
Wi-Fi Settings (Optional)
9650-0902-01 Rev. K
61
Procedure
Follow these steps to set up a server IP address.
Server Port (Full Disclosure)
This setting allows you to specify the TCP port used to connect with the server if the Full
Disclosure Transfer Mode setting is set to Server.
Values are as follows:
Step
Action
1.
From the Select Configuration Categories screen,
select Wi-Fi, then press the Enter softkey.
The Wi-Fi Settings screen appears.
2.
Press the Next Item softkey until Server IP (Full
Disclosure) appears and press the Change
Value softkey.
The Set Full Disc. Server IP Address screen
appears.
3.
Use the softkey as follows:
•
— moves the highlight up, down,
left, and right through the character selection
table.
•
Enter Char — enters the highlighted
character for each digit of the server IP
address.
•
Return — returns you to the Wi-Fi
Configuration screen. Press the Return
softkey when you are finished entering the IP
address.
Next
Item
Prev
Item
System Configuration
Wi-Fi Configuration
Defib History
Transfer Mode
DHCP/
Static IP
Both
Static IP
Main
Menu
Exit
Config
Category
List
Change
Value
Full Disclosure
Transfer Mode
Server
Page 1 of 7
System Configuration
Set Full Disc. Server IP Address
192.168.042.001
Return
Enter
Char
1
Cancel
4
7
2
5
8
3
6
9
0
<
<
.
Default:
11000