Pace settings, Pace rate setting on power-up, Async softkey in pace mode – ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 39
Pace Settings
9650-0902-01 Rev. K
33
Pace Settings
The Pace settings are attributes that control functions related to performing pacing with an
R Series unit and include:
•
Pace Rate Setting on Power-Up
•
Async Softkey in Pace Mode
Pace Rate Setting on Power-Up
This setting allows you to set the default pace rate, pulses per minute (ppm), of the R Series
when you power on the unit.
Values are as follows:
Async Softkey in Pace Mode
This setting allows you to set the unit to display the Async Pacing On/Off softkey when the
unit is in Pace mode. For information about Asynchronous Pacing, refer to the R Series
Operator’s Guide.
Values are as follows:
Possible Values:
30 ppm to 102 ppm (inclusive in increments of 4 ppm)
Default:
70 ppm
Possible Values:
Yes, No
Default:
Yes