ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION - Manual (Page 69)

Wi-Fi Settings (Optional)
9650-0902-01 Rev. K 63
Procedure
Follow these steps to set up a server name.
Server IP (Defib History)
This setting allows you to specify the server IP address to use if the following conditions are
met:
• Use DNS is set to No
• Defib History Transfer Mode is not set to None
Step Action
1. From the Select Configuration Categories screen,
select Wi-Fi, then press the Enter softkey.
The Wi-Fi Settings screen appears.
2. Press the Next Item softkey until Server Name
(Defib History) appears and press the Change
Value softkey.
The Set Server Name (Defib History) screen
appears.
3. In the character selection table:
•

moves the cursor to the next line.
• . . . — changes the table to a different set of
characters, including uppercase letters.
Use the softkeys as follows:
•

— moves the highlight up, down,
left, and right through the character selection
table.
• Enter Char — enters the highlighted
characters of the server name.
• Return — returns you to the Wi-Fi
Configuration screen. Press the Return
softkey when you are finished entering the
server name.
Next
Item
Prev
Item
System Configuration
Wi-Fi Configuration
Defib History
Transfer Mode
DHCP/
Static IP
Both
Static IP
Main
Menu
Exit
Config
Category
List
Change
Value
Full Disclosure
Transfer Mode
Server
Page 1 of 7
System Configuration
Set Server Name (Defib History)
Z O L L D N S
a
;
m
y
b
,
n
z
c
@
o
0
d
.
p
1
e
+
q
2
f
-
r
3
g
_
s
4
h
?
t
6
i
‘
u
j
“
v
Cancel
Return
Enter
Char
<
w
k l
x
<
8 9 5
:
7
Del ...
<
<
<