Nibp patient mode at power up, Nibp button press & hold, Enable motion tolerance – ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 51
NIBP Settings (Optional)
9650-0902-01 Rev. K
45
NIBP Patient Mode at Power Up
This parameter allows you to set the default patient mode at power up.
Values are as follows:
NIBP Button Press & Hold
This parameter allows you to define which NIBP function is activated when the front panel
NIBP button (
) is pressed and held for at least 2 seconds. You can configure the unit to
either:
•
Begin a sequence of STAT measurements, or
•
Begin taking NIBP measurements at repeating, selected intervals.
Values are as follows:
Enable Motion Tolerance
This parameter allows you enable compensation for motion tolerance, such as on a moving
stretcher.
Values are as follows:
Possible Values:
Adult, Pediatric, Neonate
Default:
Adult
Possible Values:
Stat, Auto
Default:
Stat
Possible Values:
Yes, No
Default:
No