ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION - Manual (Page 22)

Chapter 2 Configuration Settings
16 9650-0902-01 Rev. K
Configuration Mode Passcode
This feature allows you to set an 8-digit system configuration passcode. Once set, only those
people who know the passcode can access the configuration mode and modify settings.
Values are as follows:
Procedure
Follow these steps to set up a configuration mode passcode:
Possible Values: 0 through 3 inclusive for each digit
Default: 00000000
Step Action
1. From the Select Configuration Categories
screen, select General, then press the Enter
softkey.
The General Settings screen appears.
2. Select CONFIGURATION MODE PASSCODE
and press the Change Value softkey.
The Set Configuration Passcode screen appears.
3. Use the softkeys as follows:
• Prev Digit — moves the highlight left to the
previous digit.
• Inc Digit or Dec Digit — increments or
decrements the value of the selected digit.
• Next Digit — moves the highlight right to the
next digit to be entered.
• Enter — saves the values that you entered
and returns the unit to the General
Configuration menu.
Next
Item
Prev
Item
System Configuration
General Settings
Set/Review
CODE MARKERS Config/Review
Main
Menu
Exit
Config
Category
List
Change
Value
DEVICE IDENTIFIER ABCDEFGH 777
Page 1 of 1
00000000 CONFIGURATION
MODE PASSCODE
Prev
Digit Next
Digit
Enter
Dec
Digit
Inc
Digit
System Configuration
Set Configuration Passcode
0 0 0 0 0 0 0 0