Display fully release prompt – ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 38
Advertising
Chapter 2
Configuration Settings
32
9650-0902-01 Rev. K
parameter is set to 2.0 inches, the reference markers on the CPR bar graph are displayed at 2.0
and 2.4 inches.
Values are as follows:
Display Fully Release Prompt
This parameter, when set to Yes, specifies that the FULLY RELEASE prompt will be displayed
every 45 seconds during CPR. If this parameter is set to No, the prompt is not displayed.
Values are as follows:
Possible Values:
1.5 inches, 2.0 inches
Default:
1.5 inches
Possible Values:
Yes, No
Default:
No
Advertising