ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION - Manual (Page 48)

Chapter 2 Configuration Settings
42 9650-0902-01 Rev. K
EtCO
2
Color
This setting allows you to specify the color of the CO
2
indicator and waveform (if installed) on
the R Series monitor. Values are as follows:
NIBP Color
This setting allows you to specify the color of the NIBP indicator (if installed) on the R Series
monitor. Values are as follows:
SPO
2
at Power Up
This setting allows you to control whether the SPO
2
box appears on the R Series monitor (if
installed). If set to Yes, the box will be displayed regardless of whether the SPO
2
sensor is
connected to the unit. If set to No, the box will not appear until the sensor is connected to the
unit. Values are as follows:
Possible Values: Blue, Green, Cyan, Red, Purple, Yellow, White
Default: Yellow
Possible Values: White, Blue, Green, Cyan, Red, Purple, Yellow
Default: White
Possible Values: Yes, No
Default: No