ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION - Manual (Page 7)

9650-0902-01 Rev. K 1
Chapter 1
Introduction
The R Series
®
is designed with several user selectable features that allow operators to
configure the device according to their protocols and local requirements. This manual describes
the configuration settings (options and defaults) and how to change them for ALS, Plus, and
BLS models. References to AED settings are for Plus and BLS models only.
Note: Your unit may not contain all features listed. For BLS/Plus units, some features are
available in manual mode operation only.
For more information, see the following sections:
• “Entering System Configuration Mode” on page 2
• “Printing Configuration Settings and Activity Logs” on page 3
• “Uploading Data from a Compact Flash Card” on page 6
• “Saving Configuration to a Compact Flash Card” on page 8
• “Restoring Default Values” on page 9
• “Accessing and Changing Configuration Settings” on page 10
• “Leaving Configuration Mode” on page 11