Defib ready hold time, Enable remote sync – ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 29
Advertising
Basic Defibrillation Settings
9650-0902-01 Rev. K
23
Defib Ready Hold Time
This setting allows you to specify the amount of time that the R Series unit will hold a charge
before disarming.
Values are as follows:
Enable Remote Sync
This setting allows you to enable and disable the Remote Sync feature. If disabled (No), you
can perform synchronized cardioversion using only the R Series ECG signal. If enabled (Yes),
you can press the Sync On/Off softkey to select either Remote Sync or Sync.
Values are as follows:
Possible Values:
60 secs, 120 secs
Default:
60 secs
Possible Values:
Yes, No
Default:
No
Advertising