ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION - Manual (Page 20)

Chapter 2 Configuration Settings
14 9650-0902-01 Rev. K
General Settings
General settings are attributes that affect the unit’s basic operation and accessibility and
include:
• Device Identifier
• Configuration Mode Passcode
• Code Markers
Device Identifier
The Device Identifier feature allows you to set an 11-digit device identifier code. This code is
divided into two sub codes: the site ID (consisting of eight alphanumeric characters) and the
device ID (consisting of three alphanumeric characters). The device identifier is printed on the
summary report and fax printouts.
Values are as follows:
Procedure
Follow these steps to set up a device identifier.
Possible Values: 0 through 9, A through Z, blank and underscore inclusive for each digit.
Default: 00000000 000
Step Action
1. From the Select Configuration Categories screen,
select General, then press the Enter softkey.
The General Settings screen appears.
2. Select DEVICE IDENTIFIER and press the
Change Value softkey.
The Device Identifier screen appears.
Next
Item
Prev
Item
System Configuration
General Settings
Set/Review
CONFIGURATION
MODE PASSCODE
CODE MARKERS
00000000
Config/Review
Main
Menu
Exit
Config
Category
List
Change
Value
DEVICE IDENTIFIER ABCDEFGH 777
Page 1 of 1
System Configuration
Set Site ID
0 0 0 0 0 0 0 0
Set Device ID
0 0 0
A
1
J
S
B
2
K
T
C
3
L
U
D
4
M
V
E
5
N
W
F
6
O
X
G
7
P
,
H
8
Q
0
I
9
R
Cancel
Del
Return
Enter
Char
Y Z
_
> <