Display span, Alarm and tag, Tlog computation – Yokogawa DAQWORX User Manual
Page 106: Rolling average, Display zone, graph, partial expansion, and color, Constant, Display span -10, Alarm and tag -10, Tlog computation -10, Rolling average -10
5-10
IM WX104-01E
Dsplay Span
Sets the upper and lower limits of the display.
The range is from -9999999 to 99999999. Set the number of digits to the right the
decimal to four digits or less.
Alarm and Tag
The settings are the same as the measurement channels. For details, see section 5.2,
“Setting the Measurement Channel.”
TLOG Computaton
Tmer
Select one of the timers (1 to 3) set in the setup mode.
The computation interval of TLOG computation is set to the time assigned to the selected
timer.
Sum scale
Set the sum scale.
Rollng Average
Interval
Select the sampling interval when rolling average is activated.
Tmes (Number of samples)
Select the number of samples (number of data points used to compute the rolling
average).
Dsplay Zone, Graph, Partal Expanson, and Color
The settings are the same as the measurement channels. For details, see section 5.2,
“Setting the Measurement Channel.”
Constant
You can set constants to be used in the expression. Up to 12 and 30 constants can be
specified on the DX100/MV100 and DX200/MV200, respectively.
5.3 Settng the Computaton Channels