Yokogawa DAQWORX User Manual

Page 183

Advertising
background image

6-56

IM WX104-01E

E-mal

Set the SMTP server and mail address.

• SMTP server name

Enter the host name or IP address of the SMTP server.

• Port No.

Unless specified otherwise, set the number to the default value. The default value is

25.

• Securty (Release number 3 or later)

Select [POP before SMTP] if you need to enable POP before SMTP. To enable
authenticated e-mail transmission (Authentication SMTP), select [Auth] (release
numbers 4 and later).

• Address 1, Address 2

Enter the e-mail address. Multiple e-mail addresses can be entered in the box of one

recipient. When entering multiple addresses, delimit each address with a space. Up

to 150 characters can be entered.

• Sender

Enter the sender e-mail address. You can enter up to 64 characters.

6.5 Enterng Basc Settngs

Advertising