Time display when using the dst function, Exiting the data viewer, Time display when using the dst function -4 – Yokogawa DAQWORX User Manual
Page 66: Exiting the data viewer -4, Tme dsplay when usng the dst functon, Extng the data vewer
4-4
IM WX104-01E
Tme Dsplay When Usng the DST Functon
When displaying data on this software’s Data Monitor or Data Viewer, the data time on
the recorder varies depending on the recorder’s DST setting and the PC’s time zone
setting. If the recorder is set for DST, when recorder data is loaded on the PC, the time
of the data reverts to the time before the DST adjustment and is then adjusted according
to the PC time zone setting. The resulting time is displayed in the Data Viewer or Data
Monitor. To unify the times on the recorder and the Data Viewer/Data Monitor, match the
DST setting (in the Basic Settings) on the recorder with the PC’s time zone setting.
Extng the Data Vewer
Select [File] - [Exit] or click the [×] button. If you changed the settings in any of the windows,
a message “Save changes to ****.***?” is displayed. Click the [Yes] button, if you wish
to save the settings and exit the Data Viewer. Click the [No] button, if you do not wish to
save the settings and exit the Data Viewer.
4.1 Startng and Extng the Data Vewer