Yokogawa DAQWORX - Manual (Page 89)

4-27 IM WX104-01E
D
splay
ng Data w
th the Data V
ewer
1
2
3
4
5
6
7
8
9
Index
4.10 Savng the Dsplay Settngs
Click here ([File] - [Save Display Setting]).
The display settings can be saved to a file. The following display settings can be saved:
For dsplay fle, event fle, and lnk fle dsplays
• Print comment • The background and grid color of the
waveform display area
• Cursor A and Cursor B positions • Y-axis zone setting
• ON/OFF condition of the clipping of the displayed
waveform
• The active waveform
• Settings specified in the General Display Settings • The height of the data overview of each
group
• Mark information • The width of the zone display area of
each group
• Zoom rate of the time axis • Show/Hide condition of the zone display
area
• Display mode of the time axis (absolute/relative) • Selected group
• Waveform display area • ON/OFF condition of the alarm display
• Grid type • Position of the display screen
• The channel identification string mode (channel/tag)
• ON/OFF condition of file information items
(see section 4.1)
For TLOG fle dsplay
• ON/OFF condition of TLOG file information items (see section 4.1) and print comment
• The string to be used (channel/tag)
• Timer No.
• Display format of date and time
The information is saved to the same directory as the data files. The name of the saved
file is the name of the data file being displayed, with an added [vdx] extension (Y1116040.
DDS.vdx, for example).
This display setting file can be overwritten unlimited number of times.
When the data with the same file name is reopened, the display settings that were saved
are used. If you do not wish to open the data using the saved settings, delete the display
setting file ([vdx] extension) before opening the data file.
Note
When the data residing in the internal memory or the external storage medium of the
RECORDER are being displayed, the display settings cannot be saved.