Yokogawa DAQWORX - Manual (Page 301)

8-44 IM WX104-01E
Copyng and Pastng Setup Data
You can copy the setup data of one channel or more to other channels. Use the following
procedure to copy and paste.
1. Click the source channel number that you want to copy. To select many channels,
click the first source channel, then drag over all the channels that you want to copy.
2. Click the [Copy] button at the bottom of the window.
3. Click the destination channel number. To select many channels, click the first
destination channel, then drag over all the channels where you want to paste.
4. Click the [Paste] button at the bottom of the window.
You can also copy and paste specific channel items.
After selecting the copy source in step 1, click the [Copy Details] button to display the
[Setup Channel Copy Details] dialog box.
Select the items that you want to copy.
Key Lock/Logn
Click here. (Or choose the [Setting] menu - [SETUP [Basic] Setting] - [Setting].)
Select when using a login, auto logout, and user ID.
Turn ON when using a login.
Key Lock Settng
• Key Lock
When using the key lock function, select whether or not to activate the key lock
function (lock or free). For details, refer to the CX User’s Manual (IM 04L31A01-01E
or IM 04L31A01-03E).
• Password
Enter the password used to release the key lock using up to six characters. [???] is
displayed after the password is entered.
Logn Settng
• Use Logn
When you use the login, auto-logout, or user ID, select the appropriate items.
• Auto Logout
Selected: if idle for ten minutes, logs out automatically.
Clear: need to perform the logout operation to log out.
8.7 Basc Measurement Functon Basc Settngs