Yokogawa DAQWORX - Manual (Page 149)

6-22 IM WX104-01E
Vew Group
Set the screens that will be displayed in the 4 panel display. This function is for the
DX2000 only.
With revision R7.21 or later, you can open a settings dialog box for any view group by
double-clicking its number.
View group number
Select the group to be displayed Selectable view types
Select the type of views to be displayed or drag
and drop the view icons
Enter the view group name
[Batch 1], [Batch 2], and Other Smlar Tabs (Release number 3 or later)
When the multi batch function (/BT2 option) is enabled, select the appropriate batch tab.
Group Name
Up to 16 characters can be entered for the group name.
Vew Knd
The view group is made up of four screens. Select the type of screen to display in each
screen.
You can also select the COLUMN BAR, Annunciator display, and EVENT SWITCH
screens (release number 3 or later).
Vew Group
Up to four view groups can be registered. Specify the group to display. If you select
COLUMN BAR, specify the COLUMN BAR group.
6.4 Enterng General Settngs